Submersible Electric Slurry Pumps - Goodwin Latina

Português | Español | English |

Overview
Technical Parameters
Gallery
Features
Control Panel
Perfomance Curves
Heavy Duty Wet End

Unique External Agitator

Maximises the pumping of higher proportion of solids to water

Slurry Handling Capabilities

Solids concentration up to 65% by weight
Specific gravity up to 2.8 kg/litre
Max. Particle Size NZE = 25mm, ANZE = 32mm
Slurry temperature up to 90°C

Pump Design Features

Electrically driven 40Cv (30 kw), 1760 RPM, 220V to 440V
Flow up to 220 m³/h
Head (Max. discharge pressure) 38 m (3.8 bar)
Horizontal pumping distance up to 750m

Submergence depth 28m H₂0

Construction features permit full operation in fully, part or non-submerged conditions.

See videos of customer demonstrations.

WEIGHT AND DIMENSIONS

Pump Size	kw	RPM	kg	Dimensions (mm)						Outlet	Max Particle
				A	B	C	D	E	F	Ø (mm)	Ø (mm)
100NZE	30	1760	594	425	873	508	1320	374	533	100	25
100ANZE	30	1760	662	425	901	508	1378	431	533	100	32
We recommend that all lifting equipment used with the pump be rated at 1.5 tonnes – see lifting accessories page for an explanation

STANDARD MATERIALS
Material	Specifications
	Standards	DIN Standard
Type 4 Ni-Hard	ASTM A352 class 1 Type D	1695-GX 300 Cr.Ni.Si.-9 5 2
Grey Cast Iron	BS 1452 Grade 260	1691-GG 25
S.G. Cast Iron	BS 2789 Grade 420/12	1693-GGG 40
Precipitation Hardened Stainless Steel	FV 520B	-X5 Cr.Ni.Nb.-18 10
Stainless Steel	BS 970 431-S29	17440-X22 Cr.Ni.-17
Stainless Steel	ASTM A2960 Gr 316	17440-X5 Cr.Ni.Mo.-17 13 3

ELECTRICAL SUPPLY

The Goodwin Submersible Slurry pump is fitted with a 30 kw 1760 RPM motor. The motor is designed for 3 phase 60HZ direct on line starting. When placing an order the motor would be wound to suit the customer’s supply requirements. i.e. 380V, 415V, 500V or 550V

kw	Volts	Inrush Current at Start Up (Amps)	FLC (Amps)	Recommended HRC Fuse (Amps)
30	220*	605	103	160
30	380	350	60	100
30	440	320	55	80

* 220V by request

	Select an image from the left Hover over to zoom in Click for full size image

Benefits of a Goodwin fully automatic control panel when used in fully automatic mode: No operator needed to start and stop the pump, thus eliminating the problem of flooding It extends the life of the pump as it will not be left running on snore for extended periods of timeThe Goodwin panel does this using an electronic low current relay which detects when the pump is running on a light load (i.e. Snore). With low current sensed the pump is stopped. When the level rises and activates a mercury float switch the pump starts up again When low level is reached - the low current sensor turns off the pump This eliminates the requirement for a low level float switch which is prone to sticking. (a timer can also be used instead of a high level mercury float switch)
	Other benefits: The control panel protects against current overload and variation in the voltage supply. Preventing motor burn out that can occur with low voltages due to the increased current that is drawn at a low voltage. It has a current operated relay, which can detect an imbalance between any of the three phases. The current relay protects the pump and operator should any moisture enter the motor or the cable is damaged minimising any repair cost. It has phase discrimination to protect the pump from reverse rotation after it has been correctly installed initially. There is an hours run meter to help predict the life of wear components to help prevent non essential maintenance .

Goodwin 100mm NZE

NZE

Goodwin 100mm ANZE

ANZE

For maintenance enquiries please contact us.